Parasound New Classic 2 Channel Power Amplifier - PAR275v2
$865.00
Save $335.00
Sale Ends 31st December 2024
clearance, Open Box
In-Stock Ready to Ship
Literature
You may also like
Features
- 90 watts x 2 into 8 Ω (all channels driven)
- 150 watts x 2 into 4 Ω or 2 Ω (all channels driven)
- 200 watts x 1 bridged into 8 Ω or 4 Ω
- 20 amps peak current per channel
- 2 Ohm stable operation with load selector switch
- Two pairs of speaker outputs with front panel A/B buttons
- Rear-mounted lockout switch disables front A/B buttons
- High pass filter, switchable for 20Hz or 40Hz
- Automatic on/off by DC trigger with looping output
- Automatic on/off by audio signal with 2 sensitivity settings
- Fully discrete circuitry with high current toroid transformer
- Bridging switch for stereo or mono operation
- Efficient, low heat design
- DC Servo and relay protection circuits
- Rear-mounted left and right gain controls
- Standby, channel status and high temperature indicators
- Gold-plated RCA input jacks
- Heavy duty 24k gold-plated 5-way speaker terminals
- 115/230v selector on rear panel
- 1U rack mount kit available separately (Model RMK11)
| Power Output - (RMS power, 20 Hz - 20 kHz) | |
|---|---|
| All Channels Driven | 90 watts x 2, 8Ω,150 watts x 2, 4Ω,150 watts x 2, 2Ω (Load switch set to 2-3Ω) |
| Specifications | |
| Bridged Mono | 200 watts x 1, 8Ω,200 watts x 1, 4Ω (Load switch set to 2-3Ω) |
| Current Capacity | 20 amps peak per channel |
| Frequency Response | 20 Hz - 50 kHz, +0/-3 dB, 1 watt |
| Dynamic Headroom | 1.3 dB |
| Total Harmonic Distortion | 0.35% at full rated output, 0.025% at average listening levels |
| IM Distortion | 0.05 % |
| Transient IM Distortion | Not measurable |
| S/N Ratio | 110 dB at rated output, IHF A-weighted,103 dB at rated output, unweighted,93 dB at 2.828 V output, IHF A-weighted,84 dB at 2.828 V output, unweighted |
| Input Impedance | 33 k Ω |
| Input Sensitivity | 800 mV for full rated output (28dB) |
| Inter-Channel Crosstalk | 80 dB @1 kHz, 72 dB @10 kHz, 65 dB @ 20kHz |
| Damping Factor | Over 150 at 20Hz |
| 12V Trigger Turn On | DC 9 - 12V, 15 mA |
| Audio Turn On | Quieter: 1 mV, Louder: 6 mV |
| AC Power Requirement | 110 - 120 V / 220 -240 V, 50 - 60 Hz,0.5 watts standby,25 watts Idle (no audio),350 watts full output |
| Dimensions | 17-1/4" Wide,16" Deep, with cables connected,2-1/2" High with feet, 1-3/4" panel only (1U) (437 x 406 x 63mm, 44.1 mm panel only) |
| Net Weight | 20 lbs (9.1 kg) |